Tube ladder rad
We have restored an old Tubular Ladder Radiator which you would normally see in a church, for one of our customers.
It came into us rusty. It had a hole at the back of it. It was in a poor condition, as though it had been forgotten about for years.
We had the job to restore it back to it’d former glory.
We enjoy a challenge!!
We fixed the hole at the back.
We plugged the bottom feeds and we tapped and drilled into the sides new 1/2 inch feeds.
We then carefully blast cleaned this to bring it back to the metal.
We then polished it using our polishing machines in our workshops.
It looks fabulous!!!!
You can see the Dan the Director of BSP with it in the main image.