Extending a fireplace

We have been asked to repair this Original Cast Iron Fireplace.

The hood bracket at the back was broken and it had a cracked back.The customer also wanted us to extend the sides of this fireplace to fit its surround.

Dave set to work firstly by welding/soldering on a hand made bracket so the hood could open and close again.

He then sourced a lovely ribbed piece of cast iron in keeping with the patterning detail on the fireplace to weld onto the back.you can see this in the pictures.

He then sourced a sheet of cast iron which was cut down to size and welded onto each side to look in proportion,extending the insert.

Take a look at the pictures see what we can achieve here at Blast Spray Polish, with our experts skills and knowledge.

user name:bsp